This release proceeds to extend the coverage of ECMAScript
Notable new features:
- Advanced Promise constructor methods
: Promise.all(urls.map(u => ngx.fetch(u)))
: .then(responses => r.return(200, JSON.stringify(responses)))
Learn more about njs:
- Overview and introduction: https://nginx.org/en/docs/njs/
- Extending NGINX with Custom Code: https://youtu.be/0CVhq4AUU7M
- Using node modules with njs:
- Writing njs code using TypeScript definition files:
Feel free to try it and give us feedback on:
- Github: https://github.com/nginx/njs/issues
- Mailing list: https://mailman.nginx.org/mailman/listinfo/nginx-devel
Changes with njs 0.6.2 31 Aug 2021
*) Bugfix: fixed CPU hog when js_filter is registered
in both directions.
*) Feature: introduced AggregateError implementation.
*) Feature: added remaining Promise constructor methods.
The following methods were added: Promise.all(),
Promise.allSettled(), Promise.any(), Promise.race().
*) Improvement: removed recursion from code generator.
*) Bugfix: fixed rest parameter parsing without binding
*) Bugfix: fixed resolve/reject callback for
*) Bugfix: fixed %TypedArray%.prototype.join() with
*) Bugfix: fixed memory leak in interactive shell.
Changes with nginx 1.21.2 31 Aug 2021
*) Change: now nginx rejects HTTP/1.0 requests with the
"Transfer-Encoding" header line.
*) Change: export ciphers are no longer supported.
*) Feature: OpenSSL 3.0 compatibility.
*) Feature: the "Auth-SSL-Protocol" and "Auth-SSL-Cipher" header lines
are now passed to the mail proxy authentication server.
Thanks to Rob Mueller.
*) Feature: request body filters API now permits buffering of the data
*) Bugfix: backend SSL connections in the stream module might hang after
an SSL handshake.
*) Bugfix: the security level, which is available in OpenSSL 1.1.0 or
newer, did not affect loading of the server certificates when set
with "@SECLEVEL=N" in the "ssl_ciphers" directive.
*) Bugfix: SSL connections with gRPC backends might hang if select,
poll, or /dev/poll methods were used.
*) Bugfix: when using HTTP/2 client request body was always written to
disk if the "Content-Length" header line was not present in the
I'm glad to announce a new release of NGINX Unit.
This one is much awaited not only because the last one occurred quite some
time ago, but also because it contains some sought-after features that were
requested quite often.
:: Obtaining The Originating Client IP Address ::
When Unit operates behind a reverse proxy, it receives all incoming connections
from a proxy machine address. As a result, the originating IP address of
a client cannot be determined from the IP protocol. To overcome this, a
special HTTP request header field can be used to carry the client IP address
information over one to several proxies. Such header fields are usually called
"X-Forwarded-For", but variations exist as well ("X-Real-IP", "X-Remote-Addr",
Before, Unit could not use information from such header fields otherwise than
just pass them on "as is." With this release, functionality similar to the
real-ip nginx module became available. Now, in any listener object, you can
specify a "client_ip" option, configuring trusted proxy addresses and the
header field name, to obtain the client IP address:
Unit will use the address obtained from this header to the same effect as if a
direct connection was made from the client. For instance, it will be reflected
in any logs, used for source address matching in routing, and provided to the
application via a relevant request environment (e. g. $_SERVER['REMOTE_ADDR']
See more details in the documentation:
:: Control API to Restart Application Processes ::
Unit dynamic configuration is pretty smart and granular. If it detects
no changes to an application during reconfiguration, it won't touch the
application's processes. However, sometimes our users need to restart a
specific application, and the only good way to do that was to intentionally
introduce a change to the application's configuration. Usually, a dummy
"environment" option was used for this:
curl -X PUT -d '"$RANDOM"' --unix-socket /var/run/control.unit.sock \
While it worked well, the solution can't be called elegant; it was more like a
workaround. But now, Unit has a special section in the control API that allows
restarting any configured application with a basic GET request:
curl --unix-socket /var/run/control.unit.sock \
See here for the details of app process management in Unit:
:: TLS Sessions Cache and Tickets ::
A full TLS handshake can be quite expensive; to save server resources and
reduce latency in subsequent client connections, two ways are commonly used:
TLS sessions cache and TLS session tickets. The main difference between the
two is who stores the session information: the server (cache) or the client
(tickets). Now, Unit allows you to configure either or both:
For tickets, it doesn't only allow enabling or disabling them; you can specify
shared ticket keys between multiple servers and rotate them.
See more sophisticated configurations in the docs:
We will proceed to improve the client-side protocol support to be on par with
nginx in this regard or even go further. To be specific, HTTP/2 and HTTP/3
are definitely on our shortlist.
:: Ruby Process and Thread Start/Stop Hooks ::
Earlier this year, one of our users opened a feature request on Unit's GitHub:
https://github.com/nginx/unit/issues/535; we were asked to support hooks to be
triggered on process or thread start/stop, as does another popular Ruby web
server, Puma. These are usually used to instantiate a database connection or
to perform some other initialization or cleanup work.
A few months later, we've fulfilled the request. Here we go:
That's why I always ask you not to hesitate and instead open a feature request
for any crazy idea you may have on our GitHub issue tracker:
We'd like to hear from you, we'd like to know your cases, your issues, anything
you're struggling with or are missing and would want to see in Unit.
Sure, not all requests are handled fast. There's plenty of them pending for
years already. It's different case by case; sometimes, we're just busy with
other important tasks, sometimes the feature depends on other missing parts,
which also depend on other ones, and so on. Sometimes, it just takes a while
to find a good solution, to design a good architecture, or to find a proper
method of configuring something. Anyway, all your requests are collected and
carefully examined; perhaps, it's your idea that will be implemented next.
Please go and open a ticket if in doubt.
The full changelog for the release:
Changes with Unit 1.25.0 19 Aug 2021
*) Feature: client IP address replacement from a specified HTTP header
*) Feature: TLS sessions cache.
*) Feature: TLS session tickets.
*) Feature: application restart control.
*) Feature: process and thread lifecycle hooks in Ruby.
*) Bugfix: the router process could crash on TLS connection open when
multiple listeners with TLS certificates were configured; the bug had
appeared in 1.23.0.
*) Bugfix: TLS connections were rejected for configurations with
multiple certificate bundles in a listener if the client did not use
*) Bugfix: the router process could crash with frequent multithreaded
*) Bugfix: compatibility issues with some Python ASGI apps, notably
based on the Starlette framework.
*) Bugfix: a descriptor and memory leak occurred in the router process
when an app process stopped or crashed.
*) Bugfix: the controller or router process could crash if the
configuration contained a full-form IPv6 in a listener address.
*) Bugfix: the router process crashed when a request was passed to an
empty "routes" or "upstreams" using a variable "pass" option.
*) Bugfix: the router process crashed while matching a request to an
empty array of source or destination address patterns.
In the meantime, there are several other features currently at different stages
of development and implementation:
- Variable support in the static file serving options
- Custom variables from regexp captures in the "match" object
- Simple request rewrites using variables
- More variables to access request and connection information
- A statistics API
- Unit CLI utility tool
- App prototype processes to reduce memory usage, share the PHP opcache,
and improve the handling of apps isolation
- njs integration (https://nginx.org/en/docs/njs/index.html)
- .NET Core language module prototype
Some of them bound to appear in the next release. Stay tuned!
wbr, Valentin V. Bartenev