installing nginx on centos should be straightforward

Sun Feb 17 14:11:09 UTC 2013

what was the article that you read?
you should probably do your own tests to work out the fastest way to do 
it if you really need as many dynamic requests as possible
My thoughts at this point (after using nginx for 3+ years) is that I 
would avoid using apache - KISS!

On 17/02/13 13:42, mottwsc wrote:
> Thanks for the suggestion, Steve.  I was working from that angle before
> based on advice from a person at my hosting company and had used the nginx
> repo.  I am addressing three points in response.  Any suggestions/thoughts
> from you and/or others are appreciated.
>
> (1) Reason for nginx and apache:
> The reason I am planning to use nginx on the front end and apache on the
> back end (instead of nginx for all of it) is that I've read in an article
> that apache’s power and nginx’s speed are well known. But apache is hard on
> server memory, and nginx (while great at static files) needs the help of
> php-fpm or similar modules for dynamic content.  The article goes on to
> recommend that you combine the two web servers, with nginx as static web
> server front and apache processing the back end.  My application has a lot
> of dynamic content including videos, and makes use of ajax and jquery.
>
> What are your and others thoughts on the nginx / apache / both question?
>
>
> (2) Your command to get the nginx repo:
> when I tried this again with your specific command, I got:
> [m at 01 ~]$ rpm -Uvh
> http://nqinx.org/packages/centos/6/noarch/RPMS/nginx-release-centos-6-0.el6.ngx.noarch.rpm
> Retrieving
> http://nqinx.org/packages/centos/6/noarch/RPMS/nginx-release-centos-6-0.el6.ngx.noarch.rpm
> curl: (6) Couldn't resolve host 'nqinx.org'
> error: skipping
> http://nqinx.org/packages/centos/6/noarch/RPMS/nginx-release-centos-6-0.el6.ngx.noarch.rpm
> - transfer failed
>
>
> (3) Past attempt at installing nginx in a similar way:
> I'm pasting the output from this past attempt in case anyone can see what
> might be missing or wrong...
> [m at 01 ~]$ wget
> http://nginx.org/packages/centos/6/noarch/RPMS/nginx-release-centos-6-0.el6.ngx.noarch.rpm
> --2013-02-17 01:35:23--
> http://nginx.org/packages/centos/6/noarch/RPMS/nginx-release-centos-6-0.el6.ngx.noarch.rpm
> Resolving nginx.org... 206.251.255.63
> Connecting to nginx.org|206.251.255.63|:80... connected.
> HTTP request sent, awaiting response... 200 OK
> Length: 4311 (4.2K) [application/x-redhat-package-manager]
> Saving to: `nginx-release-centos-6-0.el6.ngx.noarch.rpm'
>
> 100%[======================================>] 4,311 --.-K/s in 0.07s
>
> 2013-02-17 01:35:23 (61.7 KB/s) -
> `nginx-release-centos-6-0.el6.ngx.noarch.rpm' saved [4311/4311]
>
> [m at 01 ~]$ rpm -ivh nginx-release-centos-6-0.el6.ngx.noarch.rpm
> warning: nginx-release-centos-6-0.el6.ngx.noarch.rpm: Header V4 RSA/SHA1
> Signature, key ID 7bd9bf62: NOKEY
> error: can't create transaction lock on /var/lib/rpm/.rpm.lock (Permission
> denied)
> [m at 01 ~]$ sudo yum install nginx
> [sudo] password for m:
> Loaded plugins: fastestmirror
> Loading mirror speeds from cached hostfile
> * base: mirrors.lga7.us.voxel.net
> * epel: epel.mirror.constant.com
> * extras: mirror.symnds.com
> * updates: mirror.team-cymru.org
> Setting up Install Process
> Resolving Dependencies
> --> Running transaction check
> ---> Package nginx.x86_64 0:0.8.55-2.el5 will be installed
> --> Processing Dependency: perl(:MODULE_COMPAT_5.8.8) for package:
> nginx-0.8.55-2.el5.x86_64
> --> Processing Dependency: libxslt.so.1()(64bit) for package:
> nginx-0.8.55-2.el5.x86_64
> --> Processing Dependency: libssl.so.6()(64bit) for package:
> nginx-0.8.55-2.el5.x86_64
> --> Processing Dependency: libgd.so.2()(64bit) for package:
> nginx-0.8.55-2.el5.x86_64
> --> Processing Dependency: libexslt.so.0()(64bit) for package:
> nginx-0.8.55-2.el5.x86_64
> --> Processing Dependency: libcrypto.so.6()(64bit) for package:
> nginx-0.8.55-2.el5.x86_64
> --> Processing Dependency: libGeoIP.so.1()(64bit) for package:
> nginx-0.8.55-2.el5.x86_64
> --> Running transaction check
> ---> Package GeoIP.x86_64 0:1.4.8-1.el5 will be installed
> ---> Package gd.x86_64 0:2.0.35-10.el6 will be installed
> --> Processing Dependency: libpng12.so.0(PNG12_0)(64bit) for package:
> gd-2.0.35-10.el6.x86_64
> --> Processing Dependency: libpng12.so.0()(64bit) for package:
> gd-2.0.35-10.el6.x86_64
> --> Processing Dependency: libjpeg.so.62()(64bit) for package:
> gd-2.0.35-10.el6.x86_64
> --> Processing Dependency: libfreetype.so.6()(64bit) for package:
> gd-2.0.35-10.el6.x86_64
> --> Processing Dependency: libfontconfig.so.1()(64bit) for package:
> gd-2.0.35-10.el6.x86_64
> --> Processing Dependency: libXpm.so.4()(64bit) for package:
> gd-2.0.35-10.el6.x86_64
> --> Processing Dependency: libX11.so.6()(64bit) for package:
> gd-2.0.35-10.el6.x86_64
> ---> Package libxslt.x86_64 0:1.1.26-2.el6_3.1 will be installed
> ---> Package nginx.x86_64 0:0.8.55-2.el5 will be installed
> --> Processing Dependency: perl(:MODULE_COMPAT_5.8.8) for package:
> nginx-0.8.55-2.el5.x86_64
> ---> Package openssl098e.x86_64 0:0.9.8e-17.el6.centos.2 will be installed
> --> Running transaction check
> ---> Package fontconfig.x86_64 0:2.8.0-3.el6 will be installed
> ---> Package freetype.x86_64 0:2.3.11-14.el6_3.1 will be installed
> ---> Package libX11.x86_64 0:1.3-2.el6 will be installed
> --> Processing Dependency: libX11-common = 1.3-2.el6 for package:
> libX11-1.3-2.el6.x86_64
> --> Processing Dependency: libxcb.so.1()(64bit) for package:
> libX11-1.3-2.el6.x86_64
> ---> Package libXpm.x86_64 0:3.5.8-2.el6 will be installed
> ---> Package libjpeg.x86_64 0:6b-46.el6 will be installed
> ---> Package libpng.x86_64 2:1.2.49-1.el6_2 will be installed
> ---> Package nginx.x86_64 0:0.8.55-2.el5 will be installed
> --> Processing Dependency: perl(:MODULE_COMPAT_5.8.8) for package:
> nginx-0.8.55-2.el5.x86_64
> --> Running transaction check
> ---> Package libX11-common.noarch 0:1.3-2.el6 will be installed
> ---> Package libxcb.x86_64 0:1.5-1.el6 will be installed
> --> Processing Dependency: libXau.so.6()(64bit) for package:
> libxcb-1.5-1.el6.x86_64
> ---> Package nginx.x86_64 0:0.8.55-2.el5 will be installed
> --> Processing Dependency: perl(:MODULE_COMPAT_5.8.8) for package:
> nginx-0.8.55-2.el5.x86_64
> --> Running transaction check
> ---> Package libXau.x86_64 0:1.0.5-1.el6 will be installed
> ---> Package nginx.x86_64 0:0.8.55-2.el5 will be installed
> --> Processing Dependency: perl(:MODULE_COMPAT_5.8.8) for package:
> nginx-0.8.55-2.el5.x86_64
> --> Finished Dependency Resolution
> Error: Package: nginx-0.8.55-2.el5.x86_64 (epel)
> Requires: perl(:MODULE_COMPAT_5.8.8)
> You could try using --skip-broken to work around the problem
> You could try running: rpm -Va --nofiles --nodigest
> [m at 01 ~]$ sudo /etc/init.d/nginx start
> sudo: /etc/init.d/nginx: command not found
>
> Posted at Nginx Forum: http://forum.nginx.org/read.php?2,236254,236259#msg-236259
>
> _______________________________________________
> nginx mailing list
> nginx at nginx.org
> http://mailman.nginx.org/mailman/listinfo/nginx