Reverse Proxy with 500k connections

[Tolga Ceylan]

Of course, with split_clients, you are at the mercy of the hashing and
hope that this distribution will spread work
evenly based on incoming client address space and the duration of
these connections, so you might run into
the limits despite having enough port capacity. More importantly, in
case of failures, your clients will see
errors, since nginx will not retry (and even if it did, the hashing
will land on the same exhausted port/ip set.)

Upstream {} with multiple backends approach is a bit more robust as if
the ports are ever exhausted, nginx
can try the next upstream. And you can try to control this further by
using least_conn backend selection.


On Tue, Mar 7, 2017 at 3:39 PM, Andrei Belov <defan at nginx.com> wrote:
> Yes, split_clients solution fits perfectly in the described use case.
>
> Also, nginx >= 1.11.4 has support for IP_BIND_ADDRESS_NO_PORT socket
> option ([1], [2]) on supported systems (Linux kernel >= 4.2, glibc >= 2.23) which
> may be helpful as well.
>
> Quote from [1]:
>
> [..]
> Add IP_BIND_ADDRESS_NO_PORT to overcome bind(0) limitations: When an
> application needs to force a source IP on an active TCP socket it has to use
> bind(IP, port=x). As most applications do not want to deal with already used
> ports, x is often set to 0, meaning the kernel is in charge to find an
> available port. But kernel does not know yet if this socket is going to be a
> listener or be connected. This patch adds a new SOL_IP socket option, asking
> kernel to ignore the 0 port provided by application in bind(IP, port=0) and
> only remember the given IP address. The port will be automatically chosen at
> connect() time, in a way that allows sharing a source port as long as the
> 4-tuples are unique.
> [..]
>
>
> [1] https://kernelnewbies.org/Linux_4.2#head-8ccffc90738ffcb0c20caa96bae6799694b8ba3a
> [2] https://git.kernel.org/torvalds/c/90c337da1524863838658078ec34241f45d8394d
>
>
>> On 08 Mar 2017, at 01:10, Tolga Ceylan <tolga.ceylan at gmail.com> wrote:
>>
>> How about using
>>
>>    split_clients "${remote_addr}AAA" $proxy_ip {
>>                   10%               192.168.1.10;
>>                   10%               192.168.1.11;
>>                   ...
>>                   *                     192.168.1.19;
>>    }
>>
>>    proxy_bind $proxy_ip;
>>
>> where $proxy_ip is populated via split clients module to spread the
>> traffic to 10 internal IPs.
>>
>> or add 10 new listener ports (or ips) to your backend server instead,
>> (and perhaps use least connected load balancing) in upstream {} set of
>> 10 backends. eg:
>>
>> upstream backend {
>>  least_conn;
>>  server 192.168.1.21:443;
>>  server 192.168.1.21:444;
>>  server 192.168.1.21:445;
>>  server 192.168.1.21:446;
>>  server 192.168.1.21:447;
>>  server 192.168.1.21:448;
>>  server 192.168.1.21:449;
>>  server 192.168.1.21:450;
>>  server 192.168.1.21:451;
>>  server 192.168.1.21:452;
>> }
>>
>>
>>
>>
>> On Tue, Mar 7, 2017 at 1:21 PM, Rainer Duffner <rainer at ultra-secure.de> wrote:
>>>
>>> Am 07.03.2017 um 22:12 schrieb Nelson Marcos <nelsonmarcos at gmail.com>:
>>>
>>> Do you really need to use different source ips or it's a solution that you
>>> picked?
>>>
>>> Also, is it a option to set the keepalive option in your upstream configure
>>> section?
>>> http://nginx.org/en/docs/http/ngx_http_upstream_module.html#keepalive
>>>
>>>
>>>
>>>
>>> I’m not sure if you can proxy web socket connections like http-connections.
>>>
>>> After all, they are persistent (hence the large number of connections).
>>>
>>> Why can’t you (OP) do the upgrade to 1.10? I thought it’s the only
>>> „supported" version anyway?
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> nginx mailing list
>>> nginx at nginx.org
>>> http://mailman.nginx.org/mailman/listinfo/nginx
>> _______________________________________________
>> nginx mailing list
>> nginx at nginx.org
>> http://mailman.nginx.org/mailman/listinfo/nginx
>
> _______________________________________________
> nginx mailing list
> nginx at nginx.org
> http://mailman.nginx.org/mailman/listinfo/nginx