Using both keepalive requests and timeout

[Das, Jagannath]

Hi,
  The 2s is the delay between which the requests are fired from the client side on the same connection.

Thanks,
Jagannath

From: "Valentin V. Bartenev" <vbart at nginx.com<mailto:vbart at nginx.com>>
Organization: NGINX, Inc.
Reply-To: "nginx at nginx.org<mailto:nginx at nginx.org>" <nginx at nginx.org<mailto:nginx at nginx.org>>
Date: Thursday, November 20, 2014 at 10:07 PM
To: "nginx at nginx.org<mailto:nginx at nginx.org>" <nginx at nginx.org<mailto:nginx at nginx.org>>
Subject: Re: Using both keepalive requests and timeout

On Thursday 20 November 2014 20:40:30 Das, Jagannath wrote:
I tried with 10s, 30s, 40s .

But you have set 2s timeout between requests in httperf,
so how do you expect it to work?

It's a timeout for inactive keep-alive connection.

If you set keepalive_timeout 10s; then a connection
will be closed after 10 seconds of inactivity, but
httperf with the --wsess=1,102,2 parameters sends
new requests every 2 seconds.

See also: http://tools.ietf.org/html/rfc7230#section-6.5

  wbr, Valentin V. Bartenev

_______________________________________________
nginx mailing list
nginx at nginx.org<mailto:nginx at nginx.org>
http://mailman.nginx.org/mailman/listinfo/nginx

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.nginx.org/pipermail/nginx/attachments/20141121/ca3cb293/attachment.html>