nginx for Windows - WSASend() socket error 10057
Yury Shpakov
yshpakov at hotmail.com
Thu Feb 13 21:45:39 UTC 2020
Hi Sergey,
I reconfigured the config file as follows:
=== === ===
#user nobody;
worker_processes 1;
#error_log logs/error.log;
#error_log logs/error.log notice;
#error_log logs/error.log info;
#pid logs/nginx.pid;
events {
worker_connections 1024;
}
mail {
server_name localhost;
auth_http localhost:9000/cgi-bin/nginxauth.cgi;
# auth_http none;
smtp_auth none;
# smtp_auth login plain cram-md5;
# smtp_capabilities "SIZE 10485760" ENHANCEDSTATUSCODES 8BITMIME DSN;
xclient off;
server {
listen 8025;
protocol smtp;
proxy on;
proxy_pass_error_message on;
}
}
http {
server {
listen 9000;
location /cgi-bin/nginxauth.cgi {
add_header Auth-Status OK;
add_header Auth-Server 127.0.0.2; # backend ip
add_header Auth-Port 143; # backend port
return 204;
}
}
}
=== === ===
And now it's responding on port 9000 as expected:
=== === ===
C:\WINDOWS\system32>curl -H "Auth-Method: plain" -H "Auth-User: user" -H "Auth-Pass: pwd" -H "Auth-Protocol: imap" -H "Auth-Login-Attempt: 1" -i http://127.0.0.1:9000/cgi-bin/nginxauth.cgi
HTTP/1.1 204 No Content
Server: nginx/1.17.9
Date: Thu, 13 Feb 2020 21:30:54 GMT
Connection: keep-alive
Auth-Status: OK
Auth-Server: 127.0.0.2
Auth-Port: 143
=== === ===
However I'm still experiencing the same issue (in log file):
=== === ===
2020/02/13 16:29:24 [notice] 35048#26192: signal process started
2020/02/13 16:29:34 [error] 31732#22720: *1 WSASend() failed (10057: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied) while in http auth state, client: 127.0.0.1, server: 0.0.0.0:8025
=== === ===
Tried under both admin and regular user.
Any further ideas how to get it fixed please?
Thank you,
Yury
________________________________
From: Sergey Brester <serg.brester at sebres.de>
Sent: Wednesday, February 12, 2020 1:51 PM
To: Yury Shpakov <yshpakov at hotmail.com>
Cc: nginx-devel at nginx.org <nginx-devel at nginx.org>
Subject: Re: nginx for Windows - WSASend() socket error 10057
I answered inline...
12.02.2020 18:59, Yury Shpakov wrote:
Hi Sergey,
Thank you for you response.
I tried netstat /nabo and I don't see any reference to port 9000 at all.
So a problem is to make nginx to listen on port 9000 (as server)?
Or nginx is not listening on port 9000 but rather sending requests to port 9000 (as client)?
With setting of `auth_http`, you are defining an URL to the service responsible for authentication (and upstream choice).
Of course then you should have something that would response to the auth-requests (your own upstream, or some nginx location, or some "foreign" http-server).
See https://docs.nginx.com/nginx/admin-guide/mail-proxy/mail-proxy/ for more examples.
Maybe it's easier not to use auth_http at all? I was trying to remove it from configuration file but nginx was not happy.
I have my own auth-module so I don't know how it can be solved in stock-nginx without this directive.
Take a look here - https://serverfault.com/questions/594962/nginx-understanding-the-purpose-of-auth-http-imap-proxy - you can use some nginx location (and internal URL to same nginx instance) to specify that.
Anyway it is recommended to use some auth (on nginx side), because it'd preserve the resources of mail-servers, allow you to authenticate email clients with same user/password for all mail-servers (smtp, imap, pop3, etc) as well as the same user/pwd as for some other http-services. And it is used to choose an upstream server (if multiple) for the email processing.
At this point I don't need any authentication. I was told by my boss to use nginx for load testing of our service sending emails (SMTP client). I've got some SMTP Server and nginx would be used as SMTP proxy because it allows to set up delays.
Well, an auth request to some nginx-location would allow you to set up delays even on authentication phase.
And take into account that I REMOVED "--with-http_ssl_module" from parameters when I was building nginx.
And you advised to download some nginx.exe files but I believe they were built without "--with-mail" parameter (which I need).
Although, it was compiled with "--with-mail" (you can see all parameters in provided GH-link<https://github.com/sebres/nginx/releases/tag/release-1.13.0>)
But it would not help, because basically your issue seems to be the configuration (not the nginx.exe).
Thank you,
Yury
________________________________
From: Sergey Brester <serg.brester at sebres.de>
Sent: Wednesday, February 12, 2020 7:38 AM
To: nginx-devel at nginx.org <nginx-devel at nginx.org>
Cc: Yury Shpakov <yshpakov at hotmail.com>
Subject: Re: nginx for Windows - WSASend() socket error 10057
It looks like your service defined in auth_http doesn't answer (or no listener on 127.0.0.1 port 9000?)...
try netstat (in cmd as admin):
netstat /nabo
netstat /nabo | grep -A 1 ":9000\b"
and check whether the listener on port 9000 is bound to 127.0.0.1 (or it is 0.0.0.0 only?) and it is the process you expect to see there (can be "reserved" by some other windows-service).
additionally try to telnet or curl it:
curl -H "Auth-Method: plain" -H "Auth-User: user" -H "Auth-Pass: pwd" -H "Auth-Protocol: imap" -H "Auth-Login-Attempt: 1" -i http://127.0.0.1:9000/cgi-bin/nginxauth.cgi
if it does not answer, make another attempt by replace 127.0.0.1 with 0.0.0.0 (or a host-name).
If it answers - see whether it is the expected response (some examples of good and bad responses are described in http://nginx.org/en/docs/mail/ngx_mail_auth_http_module.html).
But I guess if WSASend fails, it would probably (unexpected) reject the connection during the send (or even connect) process.
It can be also invalid (unexpected) content-length in keep-alive connect to auth-upstream - so send but still receive is expected (or vice versa).
Also follow this forum topic addressing similar issue: https://forum.nginx.org/read.php?2,257206,257207#msg-257207
Anyway it doesn't look to me like an issue of nginx (regardless windows or not), but you can also try some other ready build (for example on my GH<https://github.com/sebres/nginx/releases/tag/release-1.13.0> - nginx.zip<https://github.com/sebres/nginx/files/2246440/nginx.zip>, where it works well).
Regards,
Sergey
12.02.2020 03:01, Yury Shpakov wrote:
Hi there,
Trying to make nginx work as SMTP server and/or SMTP proxy. Done everything according to:
http://nginx.org/en/docs/howto_build_on_win32.html
But excluded (don't care about SSL at this point so don't want to install/configure Perl now):
--with-openssl=objs/lib/openssl-master \
--with-openssl-opt=no-asm \
--with-http_ssl_module \
And added:
--with-mail
nmake was successful and nginx.exe was created.
However nginx.exe keeps failing with the error:
WSASend() failed (10057: A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied) while in http auth state, client: 127.0.0.1, server: 0.0.0.0:8025
Windows API says the following about this error:
WSAENOTCONN
10057
Socket is not connected.
A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using sendto<https://docs.microsoft.com/en-us/windows/desktop/api/winsock/nf-winsock-sendto>) no address was supplied. Any other type of operation might also return this error—for example, setsockopt<https://docs.microsoft.com/en-us/windows/desktop/api/winsock/nf-winsock-setsockopt> setting SO_KEEPALIVE<https://docs.microsoft.com/en-us/windows/desktop/winsock/so-keepalive> if the connection has been reset.
https://docs.microsoft.com/en-us/windows/win32/winsock/windows-sockets-error-codes-2
Windows Sockets Error Codes (Winsock2.h) - Win32 apps | Microsoft Docs<https://docs.microsoft.com/en-us/windows/win32/winsock/windows-sockets-error-codes-2>
Return code/value Description; WSA_INVALID_HANDLE 6: Specified event object handle is invalid. An application attempts to use an event object, but the specified handle is not valid.
docs.microsoft.com
Managed to debug your code in VS 2010 a little bit but it's brutal C so it's hard to figure your code out. And this debugger doesn't show you any local variables values.
Any recommendation for me to make it work?
Tried to play with config (commenting/uncommenting):
#user nobody;
worker_processes 1;
#error_log logs/error.log;
#error_log logs/error.log notice;
#error_log logs/error.log info;
#pid logs/nginx.pid;
events {
worker_connections 1024;
}
mail {
server_name localhost;
auth_http localhost:9000/cgi-bin/nginxauth.cgi;
# auth_http none;
smtp_auth none;
# smtp_auth login plain cram-md5;
# smtp_capabilities "SIZE 10485760" ENHANCEDSTATUSCODES 8BITMIME DSN;
xclient off;
server {
listen 8025;
protocol smtp;
proxy on;
proxy_pass_error_message on;
}
}
Tried both under a regular user and under admin. Tried on 25, 1025 and 8025 ports.
Thank you,
Yury
_______________________________________________
nginx-devel mailing list
nginx-devel at nginx.org<mailto:nginx-devel at nginx.org>http://mailman.nginx.org/mailman/listinfo/nginx-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.nginx.org/pipermail/nginx-devel/attachments/20200213/8dba82a2/attachment-0001.htm>
More information about the nginx-devel
mailing list